Codonics EP-1000 Series Manual do Utilizador descarregar pdf (Página 3)

set-ep1000 <enter>

4. Follow the prompts. For direct connect or isolated networks, use the following:

Subnet Mask: 255.255.255.0

Gateway: 0.0.0.0

5. The final prompt asks whether to send a test print. It is strongly recommended. Press <enter> to

affirm.

Adding the EP-1000 to the Pegasys

Before configuring a Codonics printer in the Pegasys software, you must add the printer to the Pegasys

master host file using the ADD/DEL PRINTER utility. See also the section, Adding or Deleting Codonics

Printers in the Codonics Color Dye Sublimation Printers Ver. 7.0 Release Document.

1. Right click on the background to PATIENT UTILITIES > CODONICS UTILITIES > ADD/DEL PRINTER.

A UNIX window appears. To exit the Add/Del utility prior to completing a task, press <CTRL-C>.

2. Log in as Superuser: login name adac, password adacsu.

3. Type

Add <enter>

4. Follow the prompts. Use the IP address set in the preceding section as the IP address of the printer.

Please note that two hostnames cannot point to the same IP address; if there is already an entry for the

IP that you are configuring, cancel the Add or delete the old entry.

5. Verify the connection by going to a shell window and typing:

ping printer_ip

Printer Configuration in Pegasys

This section configures the options like the media size and type, MCM and formats. It is extremely important

to select the correct media size, type, and color preference. Multiple configurations can be created for a

single printer in order to have different sets of preferences. See also the section Adding a Codonics

Printer Entry in the Codonics Color Dye Sublimation Printers Ver. 7.0 Release Document.

To add a Codonics printer entry:

1. Right-click to PATIENT UTILITIES > CODONICS UTILITIES > CODONICS

CONFIGURATION.

2. Click on the Add button under the Codonics Printers list. A highlighted unTitled entry appears in the

list.

3. Click on unTitled in the Printer Name field and type the name of a new configuration. This name is

used to identify the printer. The configuration name should not contain any spaces or tabs, for example,

CODONICS_EP.

NOTE: Do not use a configuration name that is a subset of another configuration name.

For example, do not assign two configurations with the names CODONICS and

CODONICS_EP.

4. Click on the down-arrow next to the Printer Host Name field and select the correct hostname for the

printer.

5. Fill in Configuration Info with the following:

MCM=104 for custom MCM created for Philips

MCM=105 for MCM created to make EP-1000 prints resemble NP-1600 prints.

6. Fill in the remaining fields. For Media Type select Paper; Media Size select A (US Letter) or A4

(European Letter); and for Color select Color.

1 2 3 4

Sem comentários

Codonics EP-1000 Series Manual do Utilizador Página 3