Codonics EP-1000 Series Manual do Utilizador

EP-1000™SeriesInstant Dry Imager User’s ManualCodonics® Catalog Number 1000-MNLUDecember 9, 2004Version 1.1Codonics, Inc.17991 Englewood DriveMiddlebu

xPreface•Reorient the receiving antenna.•Relocate the imager with respect to the receiver.•Move the imager away from the receiver.If necessary, you sh

EP-1000 Instant Dry Imager User’s Manualxi Preface•EQUIPMENT IS NOT TO BE USED AS A COMPONENT OF A LIFE SUPPORT SYSTEM. Life support devices or system

xiiPrefaceEP-1000 PrecautionsNever Insert Any Foreign Object into the ImagerForeign objects of any kind inserted into this imager constitute a safety

EP-1000 Instant Dry Imager User’s Manualxiii PrefaceUnsuitable Materials for the ImagerMany plastic components are used in the imager’s construction.

xivPrefaceLabelingThe locations of the EP-1000 labels are shown in the following illustration.MODEL / MODLE EP-1000COLOR / DRY MEDICAL IMAGERThis dev

EP-1000 Instant Dry Imager User’s Manualxv PrefaceLimitations of UseOverviewThis section describes imager and media usage considerations that can affe

xviPrefaceEP-1000 Series DisposalDisposal of this product shall be in accordance with all applicable laws and regulations in effect at the locality at

EP-1000 Instant Dry Imager User’s Manualxvii PrefacePrint Technology: Dye Sublimation.Spatial Resolution: 314 dpi (12.36 pixels/mm).Color Resolution:

EP-1000 Instant Dry Imager User’s Manual1-1 Introduction 1IntroductionThe Codonics EP-1000 Instant Dry Imager is a thermal dye-difusion device with su

1-2IntroductionEP-1000 Instant Dry ImagerEP-1000 Back PanelnetworkUSBparallelINTERFACEPRINTONLINEmediafaultpower Power cordConnectors

EP-1000 Instant Dry Imager User’s Manual2-1 Setting Up the EP-1000 2Setting Up the EP-1000This section explains how to set up the EP-1000. The steps a

2-2IntroductionKeep the following guidelines in mind when selecting a site for the EP-1000.•Allow 2 in. (5 cm) on the left and right sides, and 15.8 i

EP-1000 Instant Dry Imager User’s Manual2-3 Setting Up the EP-10001. Open the shipping carton.2. Carefully remove the top foam with the accessories.3.

2-4IntroductionNOTE: When you do not use the EP-1000 for a long period, make sure to attach the shipping inserts on the slot, as shown below, or the r

EP-1000 Instant Dry Imager User’s Manual2-5 Setting Up the EP-1000The ribbon cartridge fits easily in the EP-1000. There is only one way to correctly

2-6Introduction2. If necessary, push the old ribbon cartridge to the left and lift it up to remove it.

EP-1000 Instant Dry Imager User’s Manual2-7 Setting Up the EP-10003. Remove the old ribbon from the ribbon carrier.NOTE: Do not discard the ribbon car

2-8Introduction6. Grasp the ribbon cartridge by the handle, and slide the spool onto the two hubs on the left side.7. Push the ribbon cartridge agains

EP-1000 Instant Dry Imager User’s Manual2-9 Setting Up the EP-10001. Make sure that your computer is turned off.2. Connect the female end (no pins) of

EP-1000 Instant Dry Imager User’s Manualiii ContentsContentsPrefaceManual Conventions ...

2-10Introduction1. Make sure that your computer is turned off.2. Connect and secure the USB cable to the USB port.3. Connect the power cord.4. Press t

EP-1000 Instant Dry Imager User’s Manual2-11 Setting Up the EP-1000Handling PaperFollow these guidelines when you handle the paper:•Hold the paper by

2-12IntroductionLoading the Paper TrayThe paper tray adjusts to the size of the paper you are loading. Do not force paper that is too long or too wide

EP-1000 Instant Dry Imager User’s Manual2-13 Setting Up the EP-10002. If necessary, adjust the paper tray to fit the paper you are loading:•Move the p

2-14Introduction4. Remove the paper from the package.5. Place the paper in the tray with the printing side (glossy side) facing up, making sure that t

EP-1000 Instant Dry Imager User’s Manual2-15 Setting Up the EP-10007. Install the paper tray in the EP-1000.8. Raise the stopper.networkUSBparallelINT

2-16IntroductionInstall the dust covers on the front and back of the EP-1000.For the front cover, install the cover as shown below (insert the cover i

EP-1000 Instant Dry Imager User’s Manual2-17 Setting Up the EP-1000When you power on the EP-1000, it initializes (starts up and performs a self-check)

2-18Introduction

EP-1000 Instant Dry Imager User’s Manual3-1 Operating the EP-1000 3Operating the EP-1000The indicator lights and control buttons on the EP-1000’s disp

ivContentsEP-1000 Series Disposal ... xviEP-1000 Series Specifications ...

3-2Operating the EP-1000Table 3-1 and Table 3-2 describe the functions of the indicator lights and control buttons.Table 3-1. Display Panel Indicator

EP-1000 Instant Dry Imager User’s Manual3-3 Operating the EP-1000When printing two or more copies of one image, you can use continuous printing. The n

EP-1000 Instant Dry Imager User’s Manual4-1 Maintenance 4MaintenanceTo keep the EP-1000 in good working condition:•Keep the EP-1000 clean. Keep the su

4-2MaintenanceTo help ensure good performance and high-quality output, make sure the operating environment is clean and dust free.Clean the EP-1000 re

EP-1000 Instant Dry Imager User’s Manual5-1 Troubleshooting 5TroubleshootingThe indicator lights become red when a problem has occurred. You must reso

5-2TroubleshootingTable 5-1. EP-1000 Indicator Lights IndicationsProblemLight IndicationsStatus Power Fault Media Parallel USBNormal Status:Power OFF{

EP-1000 Instant Dry Imager User’s Manual5-3 TroubleshootingTable 5-2 lists common problems you might encounter while operating the EP-1000, their poss

5-4TroubleshootingPrinting takes much longer than usual.The image file size may be larger than usual and, therefore, takes longer to process.The EP-10

EP-1000 Instant Dry Imager User’s Manual5-5 TroubleshootingWhite or multicolored spots appear on prints.Dust or dirt has caused contamination. • Clean

EP-1000 Instant Dry Imager User’s Manualv ContentsChapter 5: TroubleshootingInterpreting the Indicator Lights ...

5-6TroubleshootingPaper and ribbon may occasionally jam in the EP-1000. Jams are typically identified when the Fault light comes on red. Jams may occu

EP-1000 Instant Dry Imager User’s Manual5-7 TroubleshootingClearing a Paper Jam from the Ribbon Cartridge Area1. Power off the EP-1000.2. Open the top

5-8Troubleshooting3. Remove the ribbon cartridge. Push the ribbon cartridge to the left and lift it up to remove it.4. Pull out the jammed paper.5. In

EP-1000 Instant Dry Imager User’s Manual5-9 TroubleshootingClearing a Paper Jam from the Front Area1. Power off the EP-1000.2. Completely remove the p

5-10TroubleshootingClearing a Paper Jam from the Back Area1. Power off the EP-1000.2. Remove the back dust cover.3. Remove the jammed paper.4. Install

EP-1000 Instant Dry Imager User’s Manual5-11 Troubleshooting1. Position the ribbon cartridge with the torn ribbon on a clean surface as shown below.2.

5-12TroubleshootingCleaning the thermal print head helps to eliminate lines, streaks, and other artifacts on your prints.1. Power off the EP-1000, and

EP-1000 Instant Dry Imager User’s Manual5-13 Troubleshooting•Wipe only the areas shown in the following figure.3. Allow the wiped area to dry for abou

EP-1000 Instant Dry Imager User’s ManualA-1 Hazardous Material Information AHazardous Material InformationCodonics has set very stringent standards fo

A-2Hazardous Material Information•Asbestos.•Organic tin (not used in tin lead solder applications).•Ozone-depleting substances such as chlorofluorocar

EP-1000 Instant Dry Imager User’s Manualvii PrefacePrefaceBulleted ListsBullets are used to display a list of nonprocedural items. For example:The con

viiiPrefaceDisplay Panel Indicator Lights and ButtonsDisplay panel indicator light and button names are in bold.Notes and TipsNotes contain additional

EP-1000 Instant Dry Imager User’s Manualix PrefaceFor technical assistance with Codonics products, call the Codonics “On Call” Technical Support Syste