
xxvi Preface
Location Precautions
•
The device’s operating ambient temperature range is 15–30ºC
(59–86ºF), with a relative humidity of 20%–80%.
•
If the device is moved quickly from an extremely cold place to a
warmer one, condensation is likely to form. Do not use the
device if condensation has formed. Wait until the condensation
has evaporated. You can speed up the evaporation time by
moving the device to a drier location.
•
Ventilation slots and holes are provided on the sides and rear of
the device. Place the device on a level, stable surface and locate
it at least 10 cm (4 in.) from walls to ensure proper ventilation.
•
Do not place device in a high humidity or high dust area.
Airborne dirt particles can cause interference with the operation
of the device. Avoid placing the device in areas where ventilation
ducts, open doors, or frequent passers-by might expose the
device and media to high levels of debris.
•
Do not locate the device in hot-springs areas where hydrogen
sulfide and acidic ions are likely to be generated.
•
Do not locate the device where there are oily fumes and vapors.
•
Do not locate the device in direct sunlight.
•
Do not locate device near sources of high RF energy.
•
Do not locate the device where it might be subject to jarring or
vibrations, such as a table or desk in a high-traffic area. Jarring
and vibrations can affect the recording and labeling of discs.
CAUTION
Adequate ventilation is required for proper operation of the device.
Comentários a estes Manuais